7 Applied Instructions
7.5 Data Operation
245
FXCPU Structured Programming Manual
(Basic & Applied Instruction)
1
Outline
2
Instruction List
3
Configuration of
Instruction
4
How to Read
Explanation of
Instructions
5
Basic Instruction
6
Step Ladder
Instructions
7
Applied
Instructions
8
Interrupt Function
and Pulse Catch
Function
A
Relationships
between devices
and addresses
Cautions
1) The FX0, FX0S or FX0N PLC does not support the instructions of pulse operation type.
To execute pulse operation, make the instruction execution condition pulse type.
2) When two or more bits are ON in the data specified by , the low-order side is ignored, and only the
ON position on the high-order side is encoded.
3) When the command input is OFF, the instruction is not executed. Activated encode outputs are latched in
the previous ON/OFF status.
4) Some restrictions to applicable devices
S1:The FX
3U, FX3UC and FX3G PLCs only are applicable.
S2:The FX
3U and FX3UC PLCs only are applicable.
To Next Page
Loading...
