Mitsubishi Electric MELSEC FX Series - Page 335

7 Applied Instructions
7.7 Handy Instruction
333
FXCPU Structured Programming Manual
(Basic & Applied Instruction)
1
Outline
2
Instruction List
3
Configuration of Instruction
4
How to Read Explanation of Instructions
5
Basic Instruction
6
Step Ladder Instructions
7
Applied Instructions
8
Interrupt Function and Pulse Catch Function
A
Relationships between devices and addresses
[ ST ]
STL(TRUE, S2);
IF(M8041 AND M8044) THEN SET(TRUE, S20);
STL(TRUE, S20);
OUT(TRUE, Y000);
SET(X001, S21);
STL(TRUE, S21);
SET(TRUE, Y001);
OUT_T(TRUE, TC0, K10);
SET(TS0, S22);
STL(TRUE, S22);
OUT(TRUE, Y002);
SET(X002, S23);
STL(TRUE, S23);
OUT(TRUE, Y003);
SET(X003, S24);
STL(TRUE, S24);
OUT(TRUE, Y000);
SET(X001, S25);
STL(TRUE, S25);
RST(TRUE, Y001);
OUT_T(TRUE, TC1, K10);
SET(TS1, S26);
STL(TRUE, S26);
OUT(TRUE, Y002);
SET(X002, S27);
STL(TRUE, S27);
OUT(TRUE, Y004);
OUT(X004, S2);
Process of S2
Process of S20
Process of S21
Process of S22
Process of S23
Process of S24
Process of S25
Process of S26
Process of S27