2 Instruction List
2.3 Applied Instructions
34
FXCPU Structured Programming Manual
(Basic & Applied Instruction)
*1. The instruction is provided in the FXU PLC Ver. 2.30 or later.
*2. The instruction is provided in the FX
U PLC Ver. 3.07 or later.
*3. The 32-bit operations are provided in the FX
3U and FX3UC PLCs Ver. 2.20 or later.
*4. The instruction is provided in the FX
U PLC Ver. 2.10 or later.
*5. The instruction is provided in the FX
0N PLC Ver. 1.20 or later.
*6. Though programmed, this instruction is not valid because the FX
1NC or FX2NC PLC does not have a
volume to read out under this instruction.
*7. The instruction is provided in the FX
U and FX2C PLCs Ver. 3.30 or later.
*8. The instruction is not provided in the FX
U and FX2C PLCs Ver. 3.30 or later.
*9. The instruction is provided in the FX
3UC PLC Ver. 2.20 or later.
*10. The instruction is provided in the FX2N and FX2NC PLCs Ver. 3.00 or later.
*11. The instruction is provided in the FX
3UC PLC Ver. 1.30 or later.
*12. The instruction is provided in the FX
3G PLC Ver. 1.10 or later.
*13. The instruction is provided in the FX
3U and FX3UC PLCs Ver. 2.61 or later.
The FX
3UC-32MT-LT-2 PLC is due to be upgraded later.
Instruction name
Execution
condition
Function
Applicable PLCs
Reference
FX3U(C)
FX3G
FX2N(C)
FX1N(C)
FX1S
FXU/FX2C
FX0N
FX0(S)
Handy Instruction
ABSD Continuous
Absolute drum sequencer
333333
Section 7.7.3
DABSD Continuous 33333*1
INCD Continuous Incremental drum sequencer 333333 Section 7.7.4
TTMR Continuous Teaching timer 33 3 Section 7.7.5
STMR Continuous Special timer 33 3 Section 7.7.6
ALT Continuous
Alternate state
33333333
Section 7.7.7
ALTP Pulse 333333
RAMP Pulse Ramp variable value 33333333Section 7.7.8
ROTC Continuous Rotary table control 33 3 Section 7.7.9
SORT Continuous SORT tabulated data 33 *2
Section 7.7.10
External FX I/O Device
TKY Continuous
Ten key input
33 3
Section 7.8.1
DTKY Continuous 33 3
HKY Continuous
Hexadecimal input
33 3
Section 7.8.2
DHKY Continuous 33 3
DSW Continuous Digital switch 333333 Section 7.8.3
SEGD Continuous
Seven segment decoder
33 3
Section 7.8.4
SEGDP Pulse 33 3
SEGL Continuous Seven segment with latch 333333 Section 7.8.5
ARWS Continuous Arrow switch 33 3 Section 7.8.6
ASC Continuous ASCII code data input 33 3 Section 7.8.7
PR Continuous Print (ASCII code) 33 3 Section 7.8.8
FROM Continuous
Read from a special function block
3333 *4 3
Section 7.8.9
FROMP Pulse 3333 *4
DFROM Continuous 3333 *4 3
DFROMP Pulse 3333 *4
TO Continuous
Write to a special function block
3333 *4 3
Section 7.8.10
TOP Pulse 3333 *4
DTO Continuous 3333 *4 3
DTOP Pulse 3333 *4
To Next Page
Loading...
