Mitsubishi Electric MELSEC iQ-F Series - Parameter Settings; Performance Value; Error Code

32
2 HIGH-SPEED COUNTER MODULE FB
2.5 M+FX5-2HC_ErrorOperation (Error Operation)
Parameter settings
No parameter setting is required for this FB.
Performance value
*1 When the program capacity is set to 128K steps, the processing speed may be reduced.
*2 The labels in the standard area are used.
Error code
Module Processing time Maximum scan time Number of scans
FX5UJ CPU module 1.06ms 0.598ms 3 scans
FX5U CPU module, FX5UC CPU module
*1*2
0.871ms 0.485ms 3 scans
Error code Description Action
100H The setting of i_uCH (Target channel) is out of the range. The
target channel is not within the range of 1 to 2.
Execute the FB again after checking the setting.