Mitsubishi Electric MELSEC-Q Series - Operation Check

27
Execute the monitor to display the "Monitor status" screen.
The ON/OFF status of bit devices can be checked on the ladder screen.
Contacts/outputs set to ON are displayed in blue.
Right after the program execution, bit devices X02, Y1E, and Y1F are lit blue due to the instructions
from the program.
2. Operation check 1
3. Operation check 2
4. Operation check 3
Point
While pressing the key, double-click devices set to ON in Operation checks 1 and 2
to turn them OFF.
Displayed in blue
Displayed in blue
1 Double-click X0 while pressing
the key  X0 turns ON.
Displayed in blue
Displayed in blue

Y10 turns ON.
2
Double-click X1 while pressing
the key  X1 turns ON.
Displayed in blue
Displayed in blue

Y1E and Y1F turn OFF.
3
Double-click X2 while pressing
the key  X2 turns ON.
Displayed in blue
Displayed in blue
Shift