8
1 Preparing for Operation
Preparing the necessary equipment
* GX Developer Version 8 needs to be installed in your personal computer in advance.
GX Developer, the design and maintenance tool for Mitsubishi programmable controller, is
necessary to set up programmable controllers and create sequence programs.
For the installation and operation of GX Developer, refer to the following manuals.
GX Developer Version 8 Operating Manual (Startup): SH-080372E
GX Developer Version 8 Operating Manual: SH-080373E
Compatible GX Developer version
The CPU module used and its functions differ in each version of GX Developer.
For the compatible GX Developer version, refer to the following manual.
QCPU User's Manual (Hardware Design, Maintenance and Inspection):
SH-080483ENG
5
Lamp 6
Switch
1
Programmable controller
2
Personal computer 3
GX Developer
4
USB cable
Explanations for each
module are on the next
page
Windows-based PC
Version8
USB mini B type
Install *
To Next Page
Loading...
