36
Creating notes
The followings are the two types of note.
Integrated (Embedded) note
Integrated notes can be written to/read from the CPU module.
Peripheral (Separate) note
The program memory capacity can be saved since peripheral notes are not written to the
CPU module. "*" is prefixed to the peripheral note in the program.
1
Select [Edit]
[Documentation]
[Note] ( ).
2 Double-click the output
instruction symbol to enter a
note.
3 Select "Embedded".
4 Enter a note on the "Enter Note"
screen.
6 Select the [Note] menu in the
step 1 again to finish the
operation.
7 Click to close the screen.
5 Click the button.
To Next Page
Loading...
