37
Monitoring device values and status <Device monitor>
The followings are the two types of device monitor.
Device batch monitor
Monitors consecutive devices by specifying the start device number.
* The "Device batch monitor" screen can be displayed by selecting [Device batch] with a right click
on the ladder screen.
To the next page
Type Purpose
Device batch monitor Used to monitor consecutive devices of one type.
Entry data monitor
Used to simultaneously monitor separately-located devices in
the ladder or various devices on one screen.
1 Select [Online] [Monitor]
[Monitor (Write mode)]
( key) ( ).
2 Select [Online] [Monitor]
[Device batch] ( ).
3 Enter the start device number
to be monitored on the "Device
batch monitor" screen.
4 Click the button.
To Next Page
Loading...
