Mitsubishi Electric MELSEC-Q Series - Page 40

38
The values of devices and the ON/OFF status of contacts/coils are displayed.
 Entry data monitor
The device registration methods used to perform the Entry data monitoring are the specified device
registration and the device registration with ladder monitor display.
<Specified device registration>
Register specified devices on the "Entry data monitor" screen.
Operating procedure
*The "Entry data monitor" screen can be displayed by selecting [Entry data monitor] with a right click on
the ladder screen.
To the next page
5 Click to close the screen.
1 Select [Online]  [Monitor] 
[Monitor (Write mode)] ( key)
( ).
2 Select [Online]  [Monitor] 
[Entry data monitor] ( ).
3 Click the button
on the "Entry data monitor"
screen.