39
The specified device is registered on the "Entry data monitor" screen.
The values of devices and the ON/OFF status of contacts/coils are displayed.
<Device registration with ladder monitor display>
Specify the range of the ladder diagram in the ladder monitor screen and register the devices in a
batch.
*The "Entry data monitor" screen can be displayed by selecting [Entry data monitor] with a right click on
the ladder screen.
To the next page
4 Enter the device number
on the "Register device" screen.
5 Select "Display format".
6 Click the button.
7 Click to close the screen.
8 Click the button.
9 Click the button
to finish monitoring.
1 Select menu [Online]  [Monitor]
 [Monitor (Write mode)]
( key) ( ).
2 Select menu [Online]  [Monitor]
 [Entry data monitor] ( ).
To Next Page
Loading...
