6 - 152
(b) Backup from GX Developer
Select [Online] [PLC module change] [Create backup data...].
For details of the operating procedure by the GX Developer wizard, refer to the following.
GX Developer Version 8 Operating Manual
Clicking the button on the screen shown in Figure 6.117 displays the size of backup data created at
backup.
Data size can be checked by GX Developer connected to the CPU module.
This function is available regardless of the operating status of the CPU module (RUN, STOP, PAUSE) or mounting status of
a memory card.
Figure 6.117 Create backup data screen
Confirm data size
To Next Page
Loading...
