Mitsubishi Electric melsec q03ud(E)cpu - Page 451

10 - 12
(2) Use of local devices
When local devices are used, the processing time shown in Table10.17 is required.
Each n, N1, N2, and N3 in the table indicates the following:
• n: Number of programs using a local device
*1
• N1: Number of devices that specified a local device
• N2: Number of word device points that specified a local device
• N3: Number of bit device points that specified a local device
*1: If the serial number (first five digits) of the Universal model QCPU is "10011" or earlier, "n" indicates the number of executed programs.
Table10.17 Processing time (when local devices are used)
CPU module Processing time
Standard RA
M
Q00UCPU, Q01UCPU
((12.5 N1) + (0.24 (N2 + (N3 16))) + 170) n s
Q02UCPU
((12 N1) + (0.22 (N2 + (N3 16))) + 140) n s
Q03UDCPU, Q03UDECPU
((8 N1) + (0.22 (N2 + (N3 16))) + 50) n s
Q04UDHCPU, Q06UDHCPU, Q10UDHCPU,
Q13UDHCPU, Q20UDHCPU, Q26UDHCPU,
Q04UDEHCPU, Q06UDEHCPU, Q10UDEHCPU,
Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU
((8 N1) + (0.10 (N2 + (N3 16))) + 50) n s
SRAM card
Q02UCPU
((16 N1) + (0.43 (N2 + (N3 16))) + 160) n s
Q03UDCPU, Q03UDECPU
((12 N1) + (0.43 (N2 + (N3 16))) + 60) n s
Q04UDHCPU, Q06UDHCPU, Q10UDHCPU,
Q13UDHCPU, Q20UDHCPU, Q26UDHCPU,
Q04UDEHCPU, Q06UDEHCPU, Q10UDEHCPU,
Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU
((12 N1) + (0.40 (N2 + (N3 16))) + 60) n s