Mitsubishi Electric melsec q03ud(E)cpu - Page 54

CHAPTER2 SEQUENCE PROGRAMS
1
2
3
4
5
6
7
8
2.3 Settings When Program is Divided
2 - 15
(c) File usability setting Note2.1íç1
For each program, determine whether to use the file specified for the local device in the PLC file tab
of the PLC parameter dialog box.
The default is set to "Use PLC file setting".
When "Not used" is selected, data in the local device is not saved or restored when the program
execution type is changed.
注1
Figure 2.17 File usability setting
Note2.1
The Q00UJCPU does not support the file usability setting.
When using the file usability setting for the Q02UCPU, Q03UDCPU, Q04UDHCPU, Q06UDHCPU, Q13UDHCPU, or
Q26UDHCPU, check the versions of the CPU module and GX Developer. ( Appendix 2)
Universal