4
▌
LED Indicator
LED Indicator
• The LED indicator indicates the operation status by lighting and blinking with different colors and
brightness (High/Low), or by turning off.
• Indicator colors: Blue, Light blue, Purple, Red, Pink, Orange, Yellow, Green, Lime, and White
Operation status LED indicator
The unit is in operation.
Lights up in different colors according to the operation mode or the room
temperature (three different levels).
*1
The unit is stopped. Turns off.
An error is occurring. Blinks in the color it is illuminated in at the time.
Energy-save control is being
performed.
Lights up in the predetermined color.
*1
The occupancy sensor has
sensed an occupant.
Inverts the brightness (High/Low) twice.
*1
A button is touched on the
Home screen.
Inverts the brightness (High/Low).
*1
*1 The settings can be made on the LED Indicator setting screen.
Default color setting
Color Operation mode setting (default) Room temperature
Blue Cool (Auto_Cool, Setback_Cool) 32ºF–69ºF (0ºC–21ºC)
Light blue Drying Not used
Yellow Fan 70ºF–79ºF (21.5ºC–26ºC)
White Auto Not used
Green Setback Not used
Red Heat (Auto_Heat, Setback_Heat) 80ºF–104ºF (26.5ºC–40ºC)
Lime
Energy-save control is in effect that has been performed when the occupancy
sensor detected vacancy.
* Purple, pink, and orange are not used by default.
To Next Page
Loading...
