57
Function settings
Touch panel calibration
Button operation
1
Touch [Settings] from the Menu.
Then, touch [Touch panel calibration] in the list.
A confirmation screen will appear.
Touch [OK].
2
Touch the black dots in the order they appear,
starting from the top left corner.
After all nine squares are touched, the screen will
return to the previous screen.
• If each square is not touched within one minute after the last square is touched, calibration
will be canceled and the screen will return to the previous screen.
• To calibrate the screen properly, use a pointy, but not sharp object to touch the black dots.
* Sharp objects may scratch the touch panel.
To Next Page
Loading...
