Mitsubishi Electric PAR-U01MEDU Smart ME - List of Functions that Can;Cannot be Used in Combination

76
Specifications
List of functions that can/cannot be used in combination
Schedule
ON/OFF timer
Auto-OFF timer
Auto return
Set temp. range limit
Lock operations
Hold
Centrally controlled
Energy saving
(Assist function)
Schedule
1 *1 *2
ON/OFF timer
1 *1 *2
Auto-OFF timer
*1 *2
Auto return
2 *1 *2 1
Set temp. range limit
2
Lock operations
Hold
*1 *1 *1 *1
Centrally controlled
*2 *2 *2 *2 2
Energy saving
(Assist function)
1 2
: The functions can be used in combination.
1 : The “Schedule” setting is not effective because “ON/OFF timer” has the higher priority.
2 : The “Auto return” function cannot be used because the “Set temp. range limit” setting has the higher
priority.
1 : The “Auto return” function will not be executed when the units are operated in the “Set temperature offset”
mode.
2 : The units cannot be operated in the energy-saving mode if the operation is prohibited from the centralized
controller.
*1 : No schedules or timer events will be executed.
*2 : The events that are prohibited from the centralized controller will not be executed.