43
Function settings
▌
Auto-OFF timer
Auto-OFF timer allows the user to set a timer to turn off the indoor unit after the specified
time has elapsed.
Button operation
1
Select [Timer] from the Menu.
Then, touch [Auto-OFF timer] in the list.
The Auto-OFF timer will not work in the following
cases: when Auto-OFF timer is disabled, during an
error, during test run, when the ON/OFF operation
or timer execution is prohibited from the centralized
controller, when the Hold function is enabled.
2
To activate the Auto-OFF timer, touch the
[Disabled] button to change it to [Enabled].
Specify the [Stop in]-time with the buttons.
* Specify the time to elapse before the indoor unit is
automatically turned off. The settable range is 30 to
240 minutes in 10-minute increments.
* Touch and hold
or to rapidly advance the
numbers.
Touch [Done] to save the settings.
Navigating through the screens
• To return to the Menu screen: [Menu] button
• To return to the previous screen: [Back] button
To Next Page
Loading...
