208
*1 For the descriptions of the specification items, refer to Page 213, Section 7.2.2.
Item
Performance Specifications
Q00JCPU (Power supply part) Q00UJCPU (Power supply part)
Input power supply
100 to 240VAC
(85 to 264VAC)
Input frequency 50/60Hz ±5%
Input voltage distortion
factor
Within 5% ( Page 103, Section 4.8.1)
Max. input apparent
power
105VA
Inrush current
*1
40A within 8ms
Rated output
current
5VDC 3A
Overcurrent
protection
*1
5VDC 3.3A or more
Overvoltage
protection
*1
5VDC 5.5 to 6.5V
Efficiency 65% or more
Allowable momentary
power failure time
*1
Within 20ms (100VAC or more)
Dielectric withstand
voltage
2300VAC per minute (altitude 0 to 2000m)
Between the combined "line input/LG terminals" and the "FG terminal and output"
Insulation resistance
10MΩ or higher by 500VDC insulation resistance tester
Between the combined "line input/LG terminals" and the "FG terminal and output", the line input and
LG terminals, the output and FG terminals
Noise durability
• By noise simulator of 1500Vp-p noise voltage, 1µs noise width and 25 to 60Hz noise frequency
• Noise voltage IEC61000-4-4, 2KV
Operation indication LED indication (The POWER LED of the CPU part: Normal: On (green), Error: Off)
Fuse Built-in (User-unchangeable)
Contact output section None
Terminal screw size M3.5×7
Applicable wire size
0.75 to 2mm
2
Applicable solderless
terminal
RAV1.25 - 3.5, RAV2 - 3.5, thickness 0.8mm or less. Two solderless terminals can be connected to one terminal.
Applicable tightening
torque
0.66 to 0.89N•m
External dimensions
Page 145, Section 6.2
Weight
To Next Page
Loading...
