EasyManua.ls Logo

Mitsubishi Electric Q13UDVCPU - Page 211

Mitsubishi Electric Q13UDVCPU
720 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
209
CHAPTER 7 POWER SUPPLY MODULE
7
7.2 Specifications
7.2.1 Power supply module specifications
*1 For the descriptions of the specification items, refer to Page 213, Section 7.2.2.
Item
Performance Specifications
A1S61PN A1S62PN A1S63P
Mounting position Power supply module mounting slot
Applicable base unit QA1S6B
Input power supply
100 to 240VAC
(85 to 264VAC)
24VDC
(15.6 to 31.2VDC)
Input frequency 50/60Hz ±5% ----
Input voltage distortion
factor
Within 5% ( Page 103, Section 4.8.1)
---
Max. input apparent
power
105VA ----
Max. input power ---- 41W
Inrush current
20A within 8ms
*1
81A within 1ms
Rated output
current
5VDC 5A 3A 5A
24VDC ---- 0.6A ----
Overcurrent
protection
*1
5VDC 5.5A or more 3.3A or more 5.5A or more
24VDC ---- 0.66A or more ----
Overvoltage
protection
*1
5VDC 5.5 to 6.5V
24VDC ----
Efficiency 65% or more
Allowable momentary
power failure time
*1
Within 20ms
Within 10ms
(at 24VDC input)
Dielectric withstand
voltage
2300VAC per minute (altitude 0 to 2000m)
Between the combined "line input/LG terminals" and
the "FG terminal and output"
510VAC per minute (altitude 0 to
2000m)
Between the combined "line
input/LG terminals" and the "FG
terminal and output"
Insulation resistance
Between inputs and outputs (LG and FG separated), between inputs and
LG/FG, between outputs and FG/LG 10M or more by 500VDC insulation
resistance tester
5M or more by insulation
resistance tester
Noise durability
By noise simulator of 1500Vp-p noise voltage, 1µs noise width and 25 to
60Hz noise frequency
Noise voltage IEC 61000-4-4, 2KV
By noise simulator of 500Vp-p noise
voltage, 1µs noise width and 25 to
60Hz noise frequency
Operation indication LED indication (Normal: On (green), Error: Off)
Fuse Built-in (User-unchangeable)
Contact output section None
Terminal screw size M3.5 screw
Applicable wire size
0.75 to 2mm
2
Applicable solderless
terminal
RAV1.25 - 3.5, RAV2 - 3.5, thickness 0.8mm or less. Two solderless terminals can be connected to one terminal.
Applicable tightening
torque
0.66 to 0.89N•m
External
dimensions
H 130mm
W 55mm
D 93.6mm
Weight 0.60kg 0.50kg
+10%
-15%
+30%
-35%

Table of Contents

Related product manuals