312
1035
[MAIN CPU DOWN]
Runaway or failure of the CPU module
• Malfunction due to noise or other causes
• Hardware failure
■Collateral information
• Common information: -
• Individual information: Failure information
(QnUDVCPU only)
■Diagnostic timing
• Always
• Take noise reduction measures.
• Reset the CPU module and run it again. If
the same error code is displayed again, the
cause is a hardware failure of the CPU
module. Please consult your local
Mitsubishi representative.
RUN: Off
ERR.:Flashing
CPU Status:Stop
QnU
[CPU UNIT DOWN]
Runaway or failure of the CPU module
• Malfunction due to noise or other causes
• Hardware failure
■Collateral information
• Common information: -
• Individual information: Failure information
■Diagnostic timing
• Always
LCPU
1036
[MAIN CPU DOWN]
Runaway or failure of the CPU module
• Malfunction due to noise or other causes
• Hardware failure
■Collateral information
• Common information: -
• Individual information: -
■Diagnostic timing
• At power-on/At reset
• Take noise reduction measures.
• Reset the CPU module and run it again. If
the same error code is displayed again, the
cause is a hardware failure of the CPU
module. Please consult your local
Mitsubishi representative.
RUN: Off
ERR.:Flashing
CPU Status:Stop
Q50UDEHCPU,
Q100UDEHCPU
1040
[CPU UNIT DOWN]
Runaway or failure of the CPU module (built-in
I/O)
• Malfunction due to noise or other causes
• Hardware failure
■Collateral information
• Common information: -
• Individual information: Failure information
■Diagnostic timing
• Always
• Take noise reduction measures.
• Reset the CPU module and run it again. If
the same error code is displayed again, the
cause is a hardware failure of the CPU
module. Please consult your local
Mitsubishi representative.
RUN: Off
ERR.:Flashing
CPU Status:Stop
LCPU
1041
[CPU UNIT DOWN]
Runaway or failure of the CPU module (built-in
I/O)
• Malfunction due to noise or other causes
• Hardware failure
■Collateral information
• Common information: -
• Individual information: Failure information
■Diagnostic timing
• Always
• Take noise reduction measures.
• Reset the CPU module and run it again. If
the same error code is displayed again, the
cause is a hardware failure of the CPU
module. Please consult your local
Mitsubishi representative.
RUN: Off
ERR.:Flashing
CPU Status:Stop
LCPU
1042
[CPU UNIT DOWN]
Runaway or failure of the CPU module (built-in
I/O)
•
Malfunction due to noise or other causes
• Hardware failure
■Collateral information
• Common information: -
• Individual information: Failure information
■Diagnostic timing
• Always
• Take noise reduction measures.
• Reset the CPU module and run it again. If
the same error code is displayed again, the
cause is a hardware failure of the CPU
module. Please consult your local
Mitsubishi representative.
RUN: Off
ERR.:Flashing
CPU Status:Stop
LCPU
1043
[MAIN CPU DOWN]
Runaway or failure of the CPU module
• Malfunction due to noise or other causes
• Hardware failure
■Collateral information
• Common information: -
• Individual information: Failure information
■Diagnostic timing
• Always
• Take noise reduction measures.
• Reset the CPU module and run it again. If
the same error code is displayed again, the
cause is a hardware failure of the CPU
module. Please consult your local
Mitsubishi representative.
RUN: Off
ERR.:Flashing
CPU Status:Stop
QnUDV
Error
code
Error and cause Corrective action
LED status,
CPU status
Corresponding
CPU
To Next Page
Loading...
