To Next PageTo Next PageWhat to do if clock data cannot be set by SNTP for Mitsubishi Electric Controller?
Check the following on the time setting function: SNTP is set to be used; Input of the SNTP server IP address is correct.
General| Series | Q Series |
|---|---|
| Model | Q13UDVCPU |
| I/O Control Method | Refresh method |
| Number of I/O Points | 4096 points |
| Built-in Ethernet Port | Yes |
| Built-in USB Port | Yes |
| Operating Temperature | 0 to 55 °C |
| Weight | 0.2 kg |
| Control Method | Stored program control |
| Memory | Standard RAM |
| Programming Language | Ladder, SFC, ST |
| Communication | Ethernet, USB |
| Number of connectable extension modules | 64 |
| Total number of connectable modules | 64 |
| Power Supply | 5V DC |
| Operating Humidity | 5% to 95% RH (non-condensing) |
| Dimensions | 98 mm |
| Product Type | Programmable Logic Controller (PLC) |
| CPU Type | Universal model QCPU |
Precautions for designing the system to ensure safe operation, including safety circuits and error handling.
Provides precautions for mounting and removing various modules, including screws and torque.
Covers precautions for wiring power supplies, terminal blocks, and connectors.
Explains the switch operations required when writing programs.
Describes how to perform reset operations for CPU modules.
Explains the procedure for clearing latch data.
Provides guidance on selecting the appropriate power supply module based on current consumption.
Covers precautions for formatting memory cards and installing batteries.
Provides instructions for installing and removing extended SRAM cassettes.
Details the procedure for installing batteries into CPU modules.
Provides detailed procedures for replacing CPU module and SRAM card batteries.
Explains the function and procedures for changing modules online without stopping the system.
Describes the procedure for changing a faulty redundant power supply module online.
Guides on visually checking LEDs of various modules for hardware failures.
Explains how to check error details using the programming tool for troubleshooting.
Lists common functional errors and their corrective actions.
Provides detailed lists of error codes, their causes, and corrective actions for CPU modules.
Lists error codes from 1000 to 1999 with messages, contents, causes, and corrective actions.
Lists error codes from 2000 to 2999 with messages, contents, causes, and corrective actions.
Lists error codes from 3000 to 3999 with messages, contents, causes, and corrective actions.
Lists error codes from 4000 to 4999 with messages, contents, causes, and corrective actions.
Lists error codes related to communication issues with CPU modules.
Summarizes precautions for EMC Directive compliance for machinery.
Summarizes precautions for compliance with the Low Voltage Directive.
