How to fix no audio on Mitsubishi Electric Projector?
If no audio is output from your Mitsubishi Electric Projector, first check that the volume isn’t set to low. Also, verify the Audio Input setting. When the external device is connected with an HDMI cable, set the audio output of the device to PCM output.
Why menu is not working on Mitsubishi Electric Projector?
If the menu on your Mitsubishi Electric Projector can’t be used, the microcomputers inside the projector may be wrongly operating because of noise. Press the POWER button to turn off the lamp and unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord in, and try again.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | XD560U |
| Category | Projector |
| Language | English |
Covers electrical safety, handling, water, objects, servicing, and parts.
Ensures proper ventilation and safe power source usage to prevent hazards.
Critical warnings for safe projector operation, including immediate actions for issues.
Covers proper installation, environmental conditions, and hazards to avoid.
Identifies key external parts of the projector.
Details the buttons and indicators on the projector's control panel.
Lists and describes the various input/output terminals on the projector.
Shows the adjustment feet on the projector's bottom side.
Identifies and describes the buttons on the remote control.
Instructions for installing and removing batteries from the remote control.
Details the effective distance and angles for remote control operation.
Provides diagrams and tables for image size vs. projection distance.
Provides diagrams and tables for image size vs. projection distance.
Explains positional relation and provides tables for 4:3 screen aspect ratio.
Provides tables for 16:10 image aspect ratio.
Provides tables for 16:9 image aspect ratio.
Guidelines for ceiling mounting, rear projection, and warranty considerations.
Instructions for using screw holes for ceiling mount installation.
Shows how to connect projectors to AV devices like VCRs, DVD players, and HDTVs.
Details connecting equipment with an HDMI terminal.
Instructions for connecting a computer via Mini D-SUB.
Steps for setting up the projector, including power cord and lens cap.
How to adjust projection angle using adjustment feet and keystone correction.
Step-by-step guide to powering on the projector, including indicators and lamp behavior.
How to select the desired input source using buttons.
Advice on not displaying static images for long periods.
Procedure for turning off the projector safely and alternative methods.
How to use AUTO POSITION, adjust volume, and use AV mute.
How to change image aspect ratio via remote or menu.
Requirements and steps for viewing 3D content.
Warnings and precautions for safe 3D viewing, including health risks.
Details main Picture menu items like Image, Aspect Ratio, Input Level, 3D.
General procedure for accessing and setting projector menus.
Explains settings for Menu Position, Lamp Mode, Standby Mode, etc.
Detailed explanations of Picture menu items like Image, Brightness, Contrast, Color Temp.
Adjustments for Color, Sharpness, and Tint.
Settings for image position, sync, and noise reduction.
Controls for audio input selection and volume.
Detailed explanation of Installation menu items like Lamp Mode, Standby Mode.
Settings for password, cinema mode, video signal, image capture, and captions.
Configuration for network settings, IP, and wireless connections.
Displays projector status like lamp time and input signal details.
How to adjust image brightness and contrast using the menu.
How to adjust color tone and tint using the menu.
How to adjust image sharpness using the menu.
How to select preset or customize white tone (color temperature).
Setting user-defined values for brightness, hue, gamma, and BrilliantColor™ effects.
Individually adjusting tone for red, green, blue, cyan, yellow, and magenta.
Procedures for automatic and manual adjustment of computer image display.
How to enable/disable the LPF to reduce streak noise.
How to enable/disable network certification using the password.
Steps to set a custom name for the projector.
How to set or change the network password.
General settings for IP configuration.
How to enable or disable DHCP for automatic IP configuration.
How to manually set the projector's IP address.
How to set the subnet mask for network configuration.
How to set the default gateway for network communication.
How to set or clear the DHCP function.
How to confirm and apply IP configuration settings.
Steps for wireless network configuration.
How to set the SSID for wireless connection.
How to select the wireless channel.
How to set wireless encryption and key.
Finalizing wireless setup configuration.
How to enable/disable AMX device discovery for controller systems.
How to reset network settings to their defaults.
How to restart the projector's network functions.
General advice on using the network function and potential issues.
How to project computer images via a USB connection.
Projecting computer images via wired or wireless LAN, including remote desktop.
Steps for installing the LAN Display System software.
Procedure for uninstalling the LAN Display System.
Selecting a LAN Display input and operating the LAN Display System.
How to launch and start the LAN Display System application.
Steps to install the virtual display driver for extended screens.
Operating the computer remotely using USB devices.
Projecting JPEG images and PtG contents from USB without a computer.
Steps to install the software for converting PPT to PtG files.
Procedure for uninstalling the PtG Converter-Lite software.
Guide to converting PowerPoint files to PtG format.
Selecting PC Less Presentation input and choosing content.
Configuring AutoRun, Interval, Repeat, and Sorting for presentations.
How to display PtG files from the Presentation to Go menu.
How to display JPEG files from the Photo Viewer menu.
How to use the AutoRun function for automatic playback of files.
How to use the slideshow function for viewing files.
Procedure for safely unplugging the USB device after PC Less Presentation.
Capturing and displaying custom images for startup or mute screens.
How to temporarily freeze and magnify the projected image.
Function to prevent unauthorized operation using a password.
Steps for setting a new password for the projector.
How to activate or deactivate the password lock feature.
Using a computer for projector supervision and control via LAN.
Overview of ProjectorView Global+, AMX Device Discovery, Crestron RoomView, and PJLink™.
Information on using the PJLink™ protocol for projector control.
Details on connecting the projector for LAN control and accessing the user manual.
Table of commands for controlling the projector via PJLink™ protocol.
Procedure for replacing the lamp when the projector is on a table.
Procedure for replacing the lamp when the projector is ceiling-mounted.
How to reset the lamp operation time after replacement.
Recommended intervals and indicators for lamp replacement.
Solutions for when the projector does not power on, based on indicator status.
Solutions for no image display, covering AV mute, lens cap, lamp issues, and cables.
Solutions for password entry, 'No signal' display, and general image display issues.
Troubleshooting for shaking, displaced, distorted, dark, blurred, or flickering images.
Solutions for wavy images, incorrect hue/tint, missing motion areas, obscured images, and twitching.
Troubleshooting for issues like warm exhaust air, no audio, menu errors, and remote control problems.
Solutions for fan noise, abnormal sounds, maintenance, and Kensington lock.
Explains the meaning of POWER and STATUS indicators during normal operation.
Describes abnormal indicator states and their possible solutions.
Pin assignments and specifications for COMPUTER IN, MONITOR OUT, and HDMI connectors.
Projector dimensions, included items, and optional replacement parts.
Table detailing supported RGB signal modes, resolutions, and frequencies.
To Next Page