D
david21Aug 20, 2025
How to fix no image on Mitsubishi Electric Projector?
- MMegan MayAug 20, 2025
If no image appears on the screen of your Mitsubishi Electric Projector, first, try canceling the AV mute by pressing the AV MUTE button. Also, ensure that the lens cap is removed. Allow about 1 minute for the lamp to light up, and if it doesn't light up immediately, wait a few minutes and try again. If the projector was turned off before the lamp cooled down, wait for the fan to stop rotating, then press the POWER button. Check that the intake vent is clean and the lamp cover is closed. Verify that the cables connected to external devices aren't broken, and if using an extension cable, replace it with the supplied cable or add an RGB signal amplifier.