To Next PageTo Next PageWhy is the image distorted and noise heard on Mitsubishi Electric Projector?
If the image from your Mitsubishi Electric Projector is distorted and you hear noise, ensure the connecting cable is securely plugged into the terminal and that the projector is not too close to other equipment.
Why no sound is heard from Mitsubishi Electric Projector?
If you're not hearing any sound from your Mitsubishi Electric Projector, first, make sure the volume is turned up. If that doesn't work, check the connections to other equipment.
How to brighten a dark image on Mitsubishi Electric Projector?
If your Mitsubishi Electric Projector displays a dark image, adjust the brightness, tint, and color settings.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | XL5950U |
| Category | Projector |
| Language | English |
Details the projector's control panel layout and buttons.
Details the projector's input/output connection terminals.
Identifies components located on the bottom of the projector.
Illustrates and labels the buttons on the remote control.
Provides caution and details about the projector's laser beam.
Step-by-step guide for installing batteries in the remote control.
Specifies the effective range and conditions for wireless remote operation.
Explains how to connect and use the remote control via a wired connection.
Guidance on projector placement, distance, and screen alignment for optimal projection.
Instructions and considerations for mounting the projector on a ceiling.
Guidelines for setting up the projector for rear projection.
How to connect VCRs, video cameras, and other AV equipment.
Steps for connecting DVD players or HDTV decoders using component video.
Connecting computers via the Mini D-SUB 15P (VGA) port.
Connecting computers using BNC connectors.
Explanation of the DDC1/2B standard for automatic image setup.
Steps for connecting power, removing lens cap, and initial readiness.
How to adjust the projector's tilt for a level and correctly shaped image.
Detailed steps for turning the projector on and initial lamp warm-up.
Automatic adjustment of image position for computer input.
How to adjust the audio output volume from the projector's speaker.
Correct procedure for powering down the projector to protect components.
Temporarily mutes audio and video signals by pressing the MUTE button.
Adjusts display for letterboxed widescreen images, typically from DVDs.
Adjusts picture parameters like contrast, brightness, color, and sharpness.
Configures settings like auto power, splash screen, and lamp mode.
Explains how to navigate menus and select options using buttons.
Controls features like expand mode, language, and reset options.
Adjusts image signal properties, including input selection and fine-tuning.
Allows saving and recalling up to two custom picture settings.
Fine-tunes color balance for individual RGB colors and neutral tones.
Provides step-by-step instructions for adjusting contrast, brightness, and color.
Adjusts the white balance of the image by modifying color temperature.
How to manually adjust image position and sync from a connected PC.
Addresses common display problems like flickering, distortion, and noise.
Describes simple, step-by-step methods for manual image alignment and tuning.
Magnifies parts of the image or displays at native resolution.
Displays images from two different sources simultaneously.
Temporarily freezes the displayed image.
Connecting the projector to a computer for remote mouse control via USB.
Connecting the projector to a computer for remote mouse control via Serial port.
How to use the remote control as a computer mouse for pointer and clicks.
Step-by-step guide for safely replacing the projector lamp.
How to reset the lamp's usage timer after replacement.
Information on when the lamp needs replacement based on usage hours.
Instructions for cleaning the projector's air filter to ensure proper ventilation.
Guidance on cleaning the projector exterior and ventilation slots.
Proper methods for cleaning the projector lens to maintain image clarity.
How to install and activate the terminal cover's anti-theft alarm.
Procedure to check the battery status of the anti-theft alarm device.
Steps for replacing the batteries in the anti-theft alarm unit.
A table of common problems, their causes, and potential solutions.
Explains the meaning of Power, Lamp, and Temp indicator lights.
Lists key technical details like model, power, LCD panel, and picture size.
Information on using the Kensington security slot for theft prevention.
Detailed pin assignments for RS-232C and COMPUTER IN/OUT connectors.
Diagrams showing projector dimensions with and without the terminal cover.
Lists all items included in the projector's box.
Information on spare parts that can be purchased separately, like lamps.
Table of RGB signal modes, resolutions, and frequencies supported by the projector.
Specifications for the short throw zoom lens, including focal distance and picture size.
Specifications for the long throw zoom lens, including focal distance and picture size.
Specifications for the tele throw zoom lens, including focal distance and picture size.
Specifications for the rear projection short throw lens, including focal distance.
Contact details for Mitsubishi Electric in North America.
Contact details for Mitsubishi Electric in Europe.
Contact details for Mitsubishi Electric and partners in Asia.
Contact details for Mitsubishi Electric Australia and New Zealand.
