ROCKER ARMS AND CAMSHAFT
ENGINE OVERHAUL <4G63-Turbo>
11D-35
ROCKER ARMS AND CAMSHAFT
REMOVAL AND INSTALLATION
M1113005400853
SERVICE POINTS FOR REMOVAL
<<A>> LASH ADJUSTER REMOVAL
CAUTION
When reusing a lash adjuster, it must be washed
and inspected before installation. (Refer to
P.11D-37, the instruction under LASH ADJUSTER
in the INSPECTION section.)
AK306000
AC
7
16
17
15
10
12
13
14
11
8
5
18
1
2
3
4
6
20 ± 1 N·m
11 ± 1 N·m
22 ± 4 N·m
10.8 ± 1.0 N·m
14 ± 1 N·m
10 ± 2 N·m
9
Apply engine oil to
all moving parts
before installation.
Removal steps
1. Camshaft position sensor
2. O-ring
3. Cover
4. Gasket
>>F<<
5. Camshaft position sensing cylinder
>>E<<
6. Camshaft position sensor support
>>D<<
7. Camshaft oil seal
>>C<<
8. Bearing cap, rear right
>>C<<
9. Bearing cap, rear left
>>C<<
10. Bearing cap, front
>>C<<
11. Bearing cap No.5
>>C<<
12. Bearing cap No.2
>>C<<
13. Bearing cap No.3
>>C<<
14. Bearing cap No.4
>>B<<
15. Camshaft
16. Rocker arm
<<A>> >>A<<
17. Lash adjuster
18. Oil delivery body
Removal steps (Continued)
To Next Page
Loading...
