TORQUE SPECIFICATIONS
ENGINE OVERHAUL <4G63-Turbo>
11D-9
CYLINDER HEAD AND VALVES
Cylinder head bolts 78 ± 2 → 0 → 20 ± 2 → + 90° + 90°
OIL PUMP CASE AND OIL PAN
Drain plug 39 ± 5
Oil filter 14 ± 2
Oil pan bolts 9.0 ± 3.0
Oil screen bolts 19 ± 3
Oil pressure switch 19 ± 3
Oil cooler by-pass valve 54 ± 5
Relief plug 44 ± 5
Oil filter bracket bolts 19 ± 3
Plug cap 23 ± 3
Flange bolt 36 ± 3
Oil pump case bolts 23 ± 3
Oil pump cover bolts 17 ± 1
Oil pump cover screw 10 ± 2
PISTONS AND CONNECTING RODS
Connecting rod cap nuts 20 ± 2 → 90° to 94°
CRANKSHAFT AND CYLINDER BLOCK
Flywheel bolts 132 ± 5
Rear plate bolt 11 ± 1
Bell housing cover bolts 9.0 ± 1.0
Rear oil seal case bolts 11 ± 1
Beam bearing cap bolts 25 ± 2 → 90° to 100°
Item N⋅m
To Next Page
Loading...
