Troubleshooting (cont.)
Problems
Possible Solutions For More Information
The remote control doesn't
work.
• Check that the batteries are
installed correctly.
See "Getting ready' to 'ase
the remote control" in
ChapLer i for an explana-
tion of how to install batter-
ies in the remote control.
Check that the TVNCR/
AUX switch (CS-27305) or
VCRTrV switch (CS-27205)
is set to TV.
See "Remote control but-
tons and functions." in
Chapter 1, which explains
where the TVNCR/AUX (or
VCI_TV) switch is located.
Be sure that you are point-
ing the front of the remote
control toward the TV from
a distance of no more than
20 feet.
See "Getting ready to use
the remote central[" in
Chapter 1, which contains
pointers for using the
remote control.
• The TV takes several sec-
onds to respond to button
commands.
Use the ENTER button to
avoid delays.
See "Changing channels" in
Chapter 3, which explains
the fhnction of the ENTER
button.
You can't;access a channel. • Be sure that the channel
you want to view is pro-
grammed into memory.
• Check that the TV is tuned
to the correct input source
(antenna) for that channel.
See "Memorizing channels"
in Chapter 3, which explains
hew to program channels
into the TV's memory.
See "Selecting the input
source '_in Chapter 3, which
explains how to change the
input source.
78 Chapter 5: Troubleshooting
To Next Page
Loading...
Need help?
General
