MANUAL TRANSMISSION (E-W) -
Transmission
22A-3-10
PWEE9508
E
May 1995Mitsubishi Motors Corporation
"
C
A
OIL GUIDE INSTALLATION
Locate the oil guide in the transmission case.
Caution
Make sure that the locking lug 2 of the oil guide i s
correctly positioned.
"
D
A
BREATHER HOSE/BREATHER UNIT INSTALLATION
Push the breather hose into the transmission case. Fit the
breather unit.
"
E
A
PLASTIC COVER INSTALLATION
(1) Thoroughly clean the ball and socket joint.
(2) Apply Loctite 415 to the ball joint.
(3) Fit a new plastic cover on the ball and socket joint (press
down firmly).
"
F
A
INTERLOCK PLUNGERS INSTALLATION
Fit the three interlock plungers.
RevisedPWEE9508-BMitsubishi Motors Corporation
May 1996
E
2
<F5MR1, F5MR2>
<F5MR3>
RMT0010
To Next Page
Loading...
Need help?
General
