Mitsubishi FR-D740-1.5K

4
Removal and reinstallation of the cover
2.2 Removal and reinstallation of the cover
2.2.1 Front cover
3.7K or less
zRemoval (Example of FR-D740-1.5K)
1) Loosen the installation screws of the front cover. (The screws cannot be removed.)
2) Remove the front cover by pulling it like the direction of arrow.
zReinstallation (Example of FR-D740-1.5K)
1) Place the front cover in front of the inverter, and install it straight.
2) Tighten the installation screws on the front cover.
1)
Installation screw
2)
1) 2)
Installation screw