4. Additional instructions
To
prevent injury, damage, or product failure please note the following
pow.
(1)
Transpotation and mounting,
bl
CAUTION
h
Take care when carrying products, use correct lifting gear.
h
Do
not slack the inverter boxes higher than the number recommended.
Ensure that installation position and material can withstand the weight of the inverter.
install according to the information in the Instruction Manual.
h
Do
no1 operate
a
the inverter is damaged
or
has parts missing.
h
Do
not lift (he inverter with the front cover attached.
It
may fall
off,
h
Do
not stand or rest heavy objects on the inverter.
h
Check the inverter mounting orientation is correct.
h
Prevent any dust, wire fragments or other foreign bodies from dropping into the inverter
h
Do
not drop the inverter, or subject
it
to impacts.
h
Use the inverter under the following environmental conditions:
during wiring up and commissioning.
Temperatures applicable for a short time, e.g. in transit.
(2)
Wiring
d
CAUTION
Do
not fit capacitive equipment such as power factor correction capacitor, noise filter or
surge suppressor onto the output
of
the inverter.
The connection orientalion of the output cables
U,
V,
W
to
the motor will affect the
direction of rotation of the motor.
(3)
trial run
d
CAUTION
~~~
A
Check all parameters, and ensure that the machine will not be damaged by sudden
start-up.
I
.
._
To Next Page
Loading...
Need help?
General
