BODY REPAIR
BASE OF BODY REPAIR
9-34
NOTE: .
•
A slash (/) in the abbreviation indicates that two
different materials make two-layer construction.
A plus sign (+) indicates that the two different
materials mix each other.
•
If the new material symbols designated by the
ISO differ form the old symbols, both are given,
with the old symbol being enclosed in brackets.
ISO: International Organization for Standardiza-
tion
•
*1: Temperature differs depending on the ratio of
the materials included.
•
*2: Impossible to fix the temperature due to the
multi-layer and foam material structure.
•
If an infra-red lamp is used for drying, use a heat-
resistant cover, etc., to protect parts.
Thermoplastic
elastomer (olefine)
TPO (TEO) 80 (176) Mud guard, Side airdam
Urea formaldehyde UF 120 to 145 (248 to 293)
Glass fiber
reinforced
unsaturated
polyester
UP-(GT + TD)
[SMC], [BMC]
200 (392) Rear air spoiler
Ethylene vinyl
acetate
E/VAC (EVA) 60 (140) Mud guard
Talc filled
polypropylene
PP + E/P-TD
[HMPP]
80 to 100 (176 to 212) Bumper face, Side airdam, Side
protector molding
Polyvinyl chloride,
Polyurethane
PVC, PUR-E *2 Instrument panel pad
Thermoplastic
elastomer
(styrene), Talc filled
polypropylene
TES, PP-TD 100 to 120 (212 to 248) Side splash
Polycarbonate +
Acrylonitrile
butadiene
PC + ABS 120 to 125 (248 to 257) Door outside handle
Polycarbonate +
Polyethylene
terephthalate
PC + PET 120 (248) Door outside handle
Polycarbonate +
Polybutylene
terephthalate
PC + PBT 130 to 140 (266 to 284) Door outside handle
Polyphenylene
ether + Polyamide
6
PPE (PPO) + PA6 150 to 160 (302 to 320) Wheel cover
Polyphenylene
ether + Polyamide
66
PPE (PPO) +
PA66
160 to 170 (320 to 338) Wheel cover
Polyphenylene
ether + Polystyrene
PPE (PPO) + PS 120 to 130 (248 to 266) Wheel cover
MATERIAL NAME ABBREVIATION HEAT-DEFORMATION
TEMPERATURE °C (°F)
WHERE MAINLY USED
To Next Page
Loading...
Need help?
General
