27
SERVICE INFORMATION
Before requesting service please review this operation manual to correct minor complaints.
If you are unable to correct the problem, consult your MITSUBISHI Dealer or MITSUBISHI
Service Department.
DO NOT ADJUST ANY CONTROLS NOT DESCRIBED IN THIS OPERATION MANUAL.
DO NOT REMOVE THE PROTECTIVE ENCLOSURE OF THIS UNIT.
Type: Video Copy Processor
Model: P91W / P91E
Power supply and
power consumption: 120V AC, 50/60Hz, 1.2A
220-240V AC, 50/60Hz, 0.7A
Connection terminals: Video input terminal (BNC contact plug)
Video output terminal (BNC contact plug)
Resolution: Horizontal 1022 pixels x Vertical 500 lines (Standard) (NTSC)
Horizontal 1022 pixels x Vertical 600 lines (Standard) (PAL)
Gradation: 256 gradations
Printing speed: 4.7 sec (Standard) (NTSC), 5.6 sec (Standard) (PAL)
Print size: 4" X 3" (100mm X 75mm) (Standard)
Operating conditions: Temperature 41 - 104°F (5-40°C)
Humidity 20 - 80% RH (No dewing)
External dimensions: 6.1" x 3.8" x 11.8" (154mm x 97mm x 300mm ) ; W x H x D
Weight: 7.3 lbs ( 3.3Kg )
Standard accesories: BNC/BNC connection cable (2m) .............................. 1 piece
AC power cord ........................................................... 1 piece
Thermal paper K65HM .................................................. 1 roll
Wired remote control .................................................... 1 unit
Cleaning paper ......................................................... 1 sheet
Optional accessory: Thermal paper K65HM, K65H, K61S, K61B
14
SPECIFICATIONS
To Next Page
Loading...
Need help?
General
