OC196A-37
<How to operate>
To change the air flow direction, press AIR DISCHARGE button.
(1) COOL/DRY operation
At the start-up of COOL or DRY operation, the discharge direction in automatically set to 10°. After, it can be changed to
another direction with AIR DISCHARGE button on the remote controller.
<Auto return>
When 60° or 70° discharge is set with fan speed on LOW, “AUTO RETURN” appears below the room temperature display.
One hour later the direction changes to 10° automatically and “AUTO RETURN” disappears.
Available in COOL operation with fan speed on HIGH.
Unavailable in DRY operation.
If fan speed changes from LOW to HIGH during 30°
downward discharge in COOL mode, the direction auto-
matically changes to 10°.
10°
1
30° downward
2
60° downward
3
70° downward
4
SWING5
2-3 Auto vane control
<Remote controller display>
Changes by pressing the AIR DISCHARGE button.
TIMER OFF TIMER
CHECK SET TEMP.
DRY COOL
FAN
CLOCK AUTO AUTO
START STOP
MODE TIMER ON/OFF CLOCK/TIMER FAN SPEED AIR DISCHARGE FILTER
CHECK
TEST RUN
AIR SWEEP
SET TEMP. TIMER SET
F
FAN
SPEED
SWING
AUTO
RETURN
REMOTE CONTROLLER
CENTRALLY CONTROLLED
ON
ON/OFF
DRY
MODE SELECT
COOL/DRY
FAN
SET
TENPERATURE
WARMER
TIMER
FAN SPEED
LOW/HIGH
UP/DOWN
AIR
DISCHARGE
MODE
CHECK TEST RUN
HOURS
COOLER
FAN COOL
CHECK
SET TEMP
81
88
12
F
AUTO RETURN
HR
F
TIMER OFF
CHECK TEST RUN
AUTO STOP
AUTO START
LOW HIGH
POWER
SWING
STOP
(PK12/18/24/30/36FK)
PK12/18/24/30/36FK
1
PK18/24/30/36FK2
()
OC196A--2.qxp 1.12.19 10:40 AM Page 37
To Next Page
Loading...
