To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi PK36FL3 and is the answer not in the manual?
General| Brand | Mitsubishi |
|---|---|
| Model | PK36FL3 |
| Category | Air Conditioner |
| Language | English |
Details cooling capacity performance data under various conditions and includes correction factors.
Lists correction factors for cooling capacity based on refrigerant piping length and other conditions.
Shows dimensions and mounting details for PK18FL3 and PK24FL3 indoor units.
Shows dimensions and mounting details for PK30FL3 and PK36FL3 indoor units.
Displays the internal wiring connections for the PK18, PK24, PK30, and PK36FL3 indoor units.
Overview of the microprocessor control system, covering inputs/outputs for remote and unit controls.
Details COOL operation steps and a time chart for indoor unit components like thermostat and fan.
Describes the 3-minute delay mechanism for compressor start-up to prevent overload.
Explains coil frost prevention, covering compressor stop/restart conditions and temperature settings.
Covers indoor fan speed control, influenced by remote settings and outdoor unit status.
Details compressor control logic for DRY mode, covering time delays and temperature-based operation.
Notes that coil frost protection in DRY operation is identical to COOL operation.
Specifies that coil freeze prevention is inactive during DRY operation.
Outlines the procedure for a test run, covering power, button sequences, and air output checks.
Details using the self-diagnostic function via the remote controller to identify alarms and check codes.
