64
Special function
(a) Low-level sound priority mode (Local wiring)
By performing the following modication, operation noise of the outdoor unit can be reduced by about 3-4 dB.
The low noise mode will be activated when a commercially available timer or the contact input of an ON/OFF switch is added to
the CNDM connector (option) on the control board of the outdoor unit.
• The ability varies according to the outdoor temperature and conditions, etc.
1 Complete the circuit as shown when using the external input adapter (PAC-SC36NA-E). (Option)
2 SW7-1 (Outdoor unit control board): OFF
3 SW1 ON: Low noise mode
SW1 OFF: Normal operation
A Circuit diagram example
(low noise mode)
B On-site arrangement
C External input adapter
(PAC-SC36NA-E)
X: Relay
D Outdoor unit control board
E Maximum 10 m
F Power supply for relay
A
SW1
Orange
1
3
Brown
Red
EB
F
CNDM
X
X
C D
To Next Page
Loading...
