UNIT OF MEASUREMENT
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
18
Pub. No. K29001-00320 Revision: 1
UNIT OF MEASUREMENT
In this manual, the SI System (International Unit System) is basically used for the units of measurement.
The conversion rates between the SI system and other conventional systems are given below.
[Pressure] 1 MPa = 10.197 kgf/cm
2
[Torque] 1 N ·m = 0.10197 kgf ·m
[Force] 1 N = 0.10197kgf
[Horsepower] 1 kW = 1.341 HP = 1.3596 PS
[Pressure (meter of mercury)] 1 kPa = 0.75 cmHg
[Pressure (meter of water)] 1 kPa = 10.197 cmH
2
O (cmAq)
[Rotating speed] 1 min
-1
= 1 rpm
[Kinetic viscosity] 1 mm
2
/s = 1 cSt
ABBREVIATIONS AND STANDARDS
• API = American Petroleum Institute
• ASTM = American Society for Testing and Materials
• ISO = International Organization for Standardization
• JIS = Japanese Industrial Standards
• LLC = Long Life Coolant
• MHI = Mitsubishi Heavy Industries, Ltd.
• SME = Shanghai MHI Engine co., Ltd.
• OSHA = Occupational Safety and Health Administration
• SAE = Society of Automotive Engineers
• SDS = Safety Data Sheet
To Next Page
Loading...
