INSPECTION AND REPAIR OF BASIC ENGINE
6-4
1.6 Replacing valve guide
&$87,21
Because valve guides must be inserted to the speci-
fied amount, be sure to use a valve guide installer.
(1) To remove valve guides, use a valve guide remover.
(2) To press-fit valve guides, use a valve guide installer.
(3) Check contacts between valves and valve seats after
replacing valve guides.
Pulling out valve guide
Press fitting valve guide
Valve guide remover
P/N:32A91-00300
Valve guide
15.5 mm
[0.610 in.]
Valve guide
Valve guide installer
P/N:32C91-00300
Press
To Next Page
Loading...
Need help?
General
