Need help?Do you have a question about the Mitsubishi SRC92ZL-S and is the answer not in the manual?
General| Brand | Mitsubishi |
|---|---|
| Model | SRC92ZL-S |
| Category | Air Conditioner |
| Language | English |
Details the required power supply specifications for the unit.
Lists key operational parameters including capacity, power, and sound levels.
Specifies the physical dimensions of the indoor, outdoor, and remote control units.
Outlines the refrigerant piping configuration and components.
Defines the operational limits and environmental conditions for the unit.
Lists the safety features and protective controls integrated into the unit.
Provides detailed dimensions and connection points for the indoor unit.
Details dimensions and installation space requirements for the outdoor unit.
Shows the physical dimensions of the wireless remote control unit.
Illustrates the electrical wiring diagram and component connections for the indoor unit.
Details the electrical wiring diagram and component connections for the outdoor unit.
Presents indoor and outdoor unit noise levels at rated capacity across frequencies.
Details noise levels for indoor and outdoor units in Hi operating mode.
Details noise levels for indoor and outdoor units in Me operating mode.
Details noise levels for indoor and outdoor units in Lo operating mode.
Details noise levels for indoor and outdoor units in ULO operating mode.
Illustrates the refrigerant flow and component connections in the system.
Defines operational parameters, limits, and conditions for unit usage.
Explains how to adjust cooling/heating capacity based on piping length and frosting.
Provides cooling and heating capacity data under various temperature conditions.
Covers safety precautions, location selection, and general installation guidance for the indoor unit.
Details safety precautions, installation procedures, and site selection for the outdoor unit.
Provides guidelines for receiving, handling, and safely carrying the unit.
Lists criteria for selecting an appropriate installation site for the unit.
Outlines specific requirements and considerations for unit installation.
Defines limitations on piping length and height differences between units.
Provides guidelines for selecting appropriate refrigerant pipe sizes based on unit specifications.
Details procedures for flaring, brazing, and connecting refrigerant pipes on site.
Covers air tightness testing, evacuation, and refrigerant charging procedures.
Covers proper methods for installing drain pipes to prevent water leakage and ensure drainage.
Outlines procedures and safety precautions for electrical wiring connections to the unit.
Explains the functions of remote control buttons and the unit display.
Details the unit's ON/OFF button, auto restart, and custom cord switching.
Covers annual cooling function settings and flap/louver controls for airflow.
Details swing functions, memory flap, and timer operations for airflow and scheduling.
Lists major functional components and their states during heating operation.
Explains fuzzy operation, hot keep, and defrosting control during heating.
Lists major functional components and their states during cooling operation.
Explains fuzzy operation control during cooling mode.
Describes how the unit determines the operation mode based on temperature readings.
Details conditions and operations for preventing dew on the indoor unit during cooling.
Explains operating conditions and details for frost prevention during cooling or dehumidifying.
Describes protection against overload during cooling based on outdoor temperature.
Covers high pressure and low outdoor temperature protection during cooling.
Details protection against high pressure and overload during heating.
Covers low outdoor temperature heating protection and refrigeration cycle protection.
Provides general warnings and precautions before performing maintenance or disassembly.
Lists essential checks to perform before starting the troubleshooting process.
Provides a flowchart for diagnosing issues when the air conditioner does not run.
Provides a flowchart for diagnosing issues when the air conditioner runs but malfunctions.
Explains the purpose and types of data available in the service mode.
Details the steps to enter and navigate the service mode for data retrieval.
Describes self-diagnosis data, including sensor values and remote control settings.
Details stop data, including protective stop codes and conditions recorded in service mode.
A comprehensive table mapping error/stop codes to causes and occurrence conditions.
Shows how remote control settings relate to displayed data in service mode.
Provides tables correlating sensor readings with service mode display and buzzer sounds.
Provides a table correlating discharge pipe sensor readings with service mode display.
Outlines inspection steps for sensor-related errors and their characteristics.
Details troubleshooting steps for indoor fan motor issues.
Combines sensor error inspection with fan motor checks and characteristic graphs.
Covers rotor lock troubleshooting and observed phenomena for sensor short-circuits/breakages.
Provides a flowchart for diagnosing current cut issues in the unit.
Provides a flowchart for diagnosing current safe stop issues in the unit.
Details the flowchart for diagnosing compressor overheat issues.
Provides a flowchart for diagnosing signal transmission errors.
Outlines general troubleshooting steps for outdoor unit malfunctions.
Provides a flowchart for diagnosing outdoor fan motor errors.
Details the steps for checking the indoor PCB for proper functionality.
Outlines the procedure to check the indoor unit's fan motor and its PCB.
Describes the procedure for inspecting the power transistor's output voltage.
Provides steps to verify the functionality of the wireless remote control.
Highlights critical connection points and high voltage warnings for outdoor units.
Guides inspection of power source and serial signal connections on the outdoor unit.
Points to check for power transistor inspection on the outdoor unit.
Indicates points for inspecting the electronic expansion valve.
Points to check for inspecting the outdoor fan motor.
Guides inspection of sensor resistance values.
Details inspection procedures for electronic expansion valve and outdoor fan motor.
Provides a step-by-step guide for installing the wired remote control.
Covers wiring connections, installation methods, and multi-unit control setup for the wired remote.
Explains the adjustable temperature limits for different operation modes.
Details the procedure for setting upper and lower temperature limits via remote control.
Lists specific functions, their settings, and operational impacts for indoor units.
Provides detailed instructions on how to set specific functions via the remote control.
Covers safety precautions and cable connection steps for the interface kit.
Describes different mounting methods for installing the interface kit.
Outlines safety precautions, application, and accessories for the Super Link E board.
Details network address setup, grounding, and installation for the Super Link E board.
Lists parts and recommended quantities for the indoor unit.
Lists parts and recommended quantities for the outdoor unit.
Lists parts and recommended quantities for the control unit.
Provides exploded views of the indoor unit's panel and fan assembly.
Exploded view of indoor unit heat exchanger and control components with part numbers.
Exploded view of the outdoor unit's panel assembly with part numbers.
Exploded view of the outdoor unit's fan and compressor assembly with part numbers.
Exploded view of the control unit and associated parts with numbers.
To Next Page