Mitutoyo 530-101 - Precautions before Use

4
No. 99MAC002A
3 Product Applications
Outside
measurement
Inside
measurement
Step
measurement
Depth
Measurement
Outside
measurement
Inside
measurement
Step
measurement
Depth
Measurement
Caliper (standard)
• With fine-adjustment
• With automatic clamp
Yes Yes Yes Yes
Caliper (long-size) Yes Yes No No
Depth gage No No No Yes
4 Precautions before Use
• Before using this product for the first time, wipe the rust preventive oil from
the product with a soft cloth soaked with cleaning oil. If the rust preventive oil
is left on the product, it will dry on and the motion may become stiff. In this
case, wipe the sliding surface (reference surface) with a cloth to improve the
motion further.
• If cutting chips or debris adhere to the beam, measuring faces, or
graduations, wipe them off with chamois or gauze, etc.
• Apply clean oil to the beam, especially the sliding surface. This protects the
sliding surface and improves the slider motion.
• Do not perform the adjustment at sites where the temperature will change
abruptly. Thermally stabilize the instrument sufficiently at room temperature.