Mitutoyo ABSOLUTE ID-F - Display (LCD)

5
No. 99MAH054A
1 Overview
1.2.2 Display (LCD)
⑮
⑯
⑰ ⑱ ⑲
①
⑭
⑫
⑬
⑪
⑩
②
⑨
③
⑧
④
⑤
⑥
⑦
①
Calibration schedule warning display
(
"5.11.2 Calibration Schedule Warning Selection/Setting" on page 62)
②
Tolerance judgment result display (-NG)
(
"5.6 Selecting the Tolerance Judgment Result Display Method and
Setting Allowable Values" on page 44)
③
Tolerance judgment result display (OK)
( "5.6 Selecting the Tolerance Judgment Result Display Method and Setting
Allowable Values" on page 44)
④
Tolerance judgment result display (+NG)
(
"5.6 Selecting the Tolerance Judgment Result Display Method and
Setting Allowable Values" on page 44)
⑤
Function lock display ( "5.10 Setting Function Lock" on page 61)
⑥
Preset display ( "4.1.1 Setting Origin and Preset Values" on page 24)
⑦
Unit display ( "5.3 Selecting Unit System" on page 41)
⑧
Key customization display ( "4.6 Customizing Keys" on page 33)
⑨
Measured value display (tolerance judgment enlarged display)
(
"5.6 Selecting the Tolerance Judgment Result Display Method and
Setting Allowable Values" on page 44)
⑩
Hold display ( "4.5 Display Value Hold" on page 32)
⑪
Sign display