Mitutoyo ABSOLUTE ID-F - Display Value Hold

32
4 Measurement Method
No. 99MAH054A
(Short press) / (Long press)
4.5
Display Value Hold
Ifanexternaldeviceisnotconnected,thedisplayedvaluecanbeheld(xed).
Tips
During tolerance judgment enlarged display, the Hold function will not work. For
information on the tolerance judgment enlarged display, refer to
"4.4 Tolerance
Judgment" on page 31.
1 2
F3 F3
1 Pressthe[F3]key.
» Hold display ([H]) will appear and the displayed value will be held (the displayed
value will be retained even if the workpiece is removed).
2 Pressthe[F3]keywhilethedisplayedvalueisheld.
» Holddisplay([H])turnso󰀨andholdisreleased(displayscurrentplungerposition).