Mitutoyo ABSOLUTE ID-F - Page 64

52
5 Setting Parameters
No. 99MAH054A
(Short press) / (Long press)
Tips
• Press and hold the [F1] key to stop or cancel settings midway through.
• Asaresultofcalculationprocessing,adisplayvalueoverowerror(Err30)may
occur. For details, see
"7 Error Displays and Countermeasures" on page 71.
• Thedefaultsettingofthecalculationcoe󰀩cientisA=1.
• Ifthecalculationcoe󰀩cientAissetto00.0000,acalculationcoe󰀩cientsetting
error(Err91)willoccur.Pressthe[F2]keyandresetitsothatA≠0.
• Calculationcoe󰀩cientisnotconvertedevenwhentheunitsystemorresolutionis
switched.