Mitutoyo ABSOLUTE ID-F - Page 67

55
No. 99MAH054A
5 Setting Parameters
(Short press) / (Long press)
2 Select ON/OFF for the analog bar display.
1 Press the [F1] key or [F3] key.
» Each time the key is pressed, the analog bar display turns ON/OFF alternately.
2 Press the [F2] key.
If analog bar display ON [on] is selected:
» Analog bar scale can be set.
When analog bar display OFF [oFF] is selected:
» Selectionisconrmed;shiftstothenextparameteritem.
(Go to "5.9 Selecting Switch Function" on page 57.)
3 Setting the analog bar scale
1 Press the [F1] key or [F3] key.
» Each time the key is pressed, the setting of the analog bar scale changes.
mm in
Auto Auto
0.0005 0.00002
0.001 0.00005
0.002 0.0001
0.005 0.0002
0.01 0.0005
0.02 0.001
0.05 0.002
0.1 0.005
0.2 0.01
0.5 0.02
2 Press the [F2] key.
» Settingsofanalogbarscaleareconrmed;shiftstothenextparameteritem.
(Go to "5.9 Selecting Switch Function" on page 57.)