Mitutoyo ABSOLUTE ID-F - Common Specifications

83
No. 99MAH054A
9Specications
■Commonspecications
Protection level
*4
IP40
*5
CEmarking/
UKCAmarking
EMC Directive / Electromagnetic Compatibility Regulations: EN IEC 61326-1
Immunity test requirement: Clause 6.2 table 2
Emission limit: Class B
RoHS Directive / The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations:
EN IEC 63000
Power supply External power supply (AC adapter 5.9 V 2 A)
Scale Electrostatic capacitance type absolute linear encoder
Response speed Unlimited
Display of 7
segments
11 mm
Display of analog
bar
±20 scale
Backlight Always: Green, Tolerance judgment NG: Red
Display rotate 330°
Functions
Zero set, Preset, Peak detection
*6
, Counting direction switching,
Tolerance judgment, Simple calculation, Key customize, Function lock,
Calibration schedule warning display, Error warning display, Unit system
switching
*7
Data output DIGIMATIC d1, DIGIMATIC d2
I / O DIGIMATIC S1
Temperature range
Operation: 0 °C – 40 °C, Storage: -10 °C – 60 °C
Standard
accessories
User'smanualwithwarranty,Certicateofinspection,ACadapter,Lifting
lever (part No. 21EAA426)
*8
*1:TheorderNo.su󰀩xvariesdependingontheincludedACadapter.
*2: During normal measurement at 20 °C.
*3:Overallmaginicationandlinerlity.
*4: The protection level (IP: International Protection) is based on IEC 60529 / JIS C
0920.
*5: Values are for factory conditions.
*6: The peak detection speed is 50 times / s for resolution 0.0005 mm / 0.00002 in and
500 times / s otherwise.
*7:
Only for ID-F0512ENX, ID-F0512ENXB, ID-F0525ENX, ID-F0550ENX, ID-F0550HENX
*8: Except for the 12.7 mm / 0.5 in model