Mitutoyo ABSOLUTE ID-F0550HENX - Release (Optional)

13
No. 99MAH054A
2 Preparations before Use
2 Fixtheplunger,usingplierspaddedwitharag,etc.,sothatitdoesnot
turn,andthenremovethescrew(M2.5)ontopoftheplunger.
Duringthisprocess,pushtheplungerupward.
3 Mounttheliftingknobontopoftheplunger.
Tips
Store the removed screw and cap to prevent loss.
2.3.3 Release (Optional)
Only for 12.7 mm and 12.7 mm / 0.5 in measuring range models (ID-F0512NX,
ID-F0512NXB, ID-F0512ENX, ID-F0512ENXB)
4
2
3
1
Cap
Screw
Screw
Mounting plate
Release
1 Rotatethecapcounterclockwisetoremoveitfromtheproduct.
Tips
Store the removed cap to prevent loss.
2 Fixtheplunger,usingplierspaddedwitharag,etc.,sothatitdoesnot
turn,andthenremovethescrew(M2.5)ontopoftheplunger.
3 Use the screw removed in step 2 to secure the mounting plate supplied
with the release to the plunger.
4 Secure the tip of the release to the mounting plate.