USER MANUAL | T10 & NC8/NS8
Setup and Use
• Plug power cord into outlet, then plug other end into transmitter.
• Attach antennae by fitting and twisting to the right.
• To turn on pagers, hold the RIGHT arrow for 5 seconds.
• The Pager display will show the number (01, 02, etc.) in the bottom
right corner.
• To wake up the pager from display sleep, hold the RIGHT arrow for 1
second.
Pager Charger
Plug cable into charging dock for watches, and directly into beepers (see
page 8-9).
To Next Page
Loading...