USER MANUAL | T10 & NC8/NS8
2. Use RIGHT arrow to move cursor through number, and LEFT arrow to
change numbers. 24 hour mode only (Hour:Minute:Second). Press OK
when done to return to main menu.
3. To leave the menu at any time, hold the LEFT arrow until you return to
the main screen.
Change Display Timeout
1. This will change how long the display stays on before going dark (but
not turning off the pager completely).
2. Use the RIGHT arrow to scroll through menu to “2-Disp Timeout”. Press
OK when option is highlighted.
To Next Page
Loading...