© MOBATIME 63 / 104 800870.05
8 Time administration
8.1 Concept of time administration
The internal master clock as well as the real-time clock runs with UTC (Universal Time
Coordinated). The synchronisation inputs, the time shown on the display, as well as all
outputs are linked via a time zone entry with the master clock time, i.e. all inputs and
outputs can be individually allocated to a specific time zone.
C
onfigurable time zones:
(A) chapter 6.5.8 Time source
(B) chapter 6.5.2 DCF – output
(C) chapter 6.5.3 DCF / Pulse / Frequency output
(D) chapter 6.5.5 IRIG / AFNOR / DCF-FSK Output
(E) chapter 6.5.4 Serial interface
(F) chapter 6.5.6 NTP slave clocks / time zone server
(G) chapter 6.5.19 General settings
* NTP is always UTC
Time zone entry
Time zone entry
Time zone entry
Serial Telegrams
Line
IRIG / AFNOR
Line
DCF
Line
LAN Multicast
Devices
DCF Main
UTC
Hauptuhr
NTP
External DCF
Time source
External AFNOR A/C
IRIG-B12x source
Time zone entry
Time zone entry
Time zone entry
(A)
(B)
(C)
(D)
(E)
(F)
Time zone entry
- Display
- Operation
- Error report
(G)
*