EasyManua.ls Logo

Mobatime DTS 4138.timeserver - Status Changed [Dts4138 Statuschanged]; Configuration Changed [Dts4138 Configchanged]

Mobatime DTS 4138.timeserver
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© MOBATIME 72 / 104 800870.05
9.3.3 Status changed [dts4138StatusChanged]
Sent out when the subagent detects a status change in the DTS application process.
The following variables are monitored for changes:
dts4138SysStatus, dts4138NTPTInfoCurrentSource, dts4138SysStratum
This Notification is always sent out, as soon as SNMP is activated, and a destination
address is configured.
The Notification sent out contains the following data:
Field Type Size Description Example
dts4138SysStatus Unsigned Int 4 Bytes
Contains the internal
system status
66309
dts4138SysOffset Integer 4 Bytes
Actual time offset of
the system [us]
-1523 -1.523ms
dts4138SysTimeSource
Byte 1 Byte Actual time source
2
dts4138SysStratum Byte 1 Byte
Actual system
stratum level
1
9.3.4 Configuration changed [dts4138ConfigChanged]
Sent out when the subagent detects a configuration change in the DTS application
processes.
This Notification is always sent out, as soon as SNMP is activated and a destination
address is configured.
The Notification sent out contains the following data:
Field Type Size Group
dts4138SysConfigChangedTime
TimeTicks 4 Bytes dts4138System
dts4138NetworkIf0ConfigChangedTime
TimeTicks 4 Bytes
dts4138NetworkIf0
dts4138NetworkIf1ConfigChangedTime
TimeTicks 4 Bytes
dts4138NetworkIf1
dts4138NetConfigChangedTime
TimeTicks 4 Bytes
dts4138Network
dts4138NetServicesConfigChangedTime
TimeTicks 4 Bytes
dts4138NetServices
dts4138TSConfigChangedTime
TimeTicks 4 Bytes
dts4138TimeSource
dts4138RedOpConfigChangedTime
TimeTicks 4 Bytes
dts4138TimeRedundantOp
dts4138NTPConfigChangedTime
TimeTicks 4 Bytes
dts4138TimeNTPServer
dts4138OutMainDCFConfigChangedTime
TimeTicks 4 Bytes
dts4138OutMainDCF
dts4138OutLineDCFPulseFREQConfigChangedTime
TimeTicks 4 Bytes
dts4138OutLineDCFPulseFREQ
dts4138OutLineSerialConfigChangedTime
TimeTicks 4 Bytes
dts4138OutLineSerial
dts4138OutLineIRIGConfigChangedTime
TimeTicks 4 Bytes
dts4138OutLineIRIG
dts4138OutLineTZServerConfigChangedTime
TimeTicks 4 Bytes
dts4138OutLineTZServer
dts4138RelayConfigChangedTime
TimeTicks 4 Bytes
dts4138AlarmRelayConfig
dts4138MailConfigChangedTime
TimeTicks 4 Bytes
dts4138AlarmMailConfig
dts4138SnmpConfigChangedTime
TimeTicks 4 Bytes
dts4138SnmpConfig
dts4138SnmpV3ConfigChangedTime
TimeTicks 4 Bytes
dts4138SnmpV3
The ConfigChangedTime variables show the time of the last change of the relevant
configuration group as TimeTicks value in 1/100th seconds. The management system
can decide on the basis of these time values, which configurations need to be
reloaded.
The groups and their parameters are listed in appendix “G Parameters“.

Table of Contents