Mobi Technologies 70118 User Manual

Air Non-Contact Forehead / Object
Thermometer
Model No.: 70118
Instruction Manual
Please Read this instruction Manual Completely before operating
MEASUREMENT PREPARATIONS
• For proper measurements always store the device in same area being used for at least 30
Minutes before use. An unexpected fluctuation of ambient temperature is likely to lower
measuring accuracy.
• Do not talk or move body during measurement.
• Temperature is likely to increase immediately after exercise, bathing or other physical exertion.
If measurement appears to be incorrect please wait 5-15 minutes before taking measurement
again.
• Replace battery when low battery indicator is On.
Forehead Temperature
• Press the Power Button to Turn the Thermometer ON. The Unit will run a self-test and all
symbols on the display will momentarily appear.
• Ensure that the thermometer is in the human mode; the Human symbol will be on the display.
Press and release MODE button to toggle between different 4 Modes (Human with Sound,
Object with Sound, Human Without Sound, Object without sound).
• Aiming the sensor at the person’s Forehead between the eyebrows, approximately 1 Inch (0.5 - 3
cm) away. Press and release SCAN Button, you will hear a short beep means this temperature
reading has been completed.
• If the temperature measurement is below 100.4 ° F or 38 ° C a Smiling Face will be
appearing next to the reading.
• If the reading is 100.4 ° F or 38 ° C or above, a Frowning Face will be displayed and
the RED LED light up.

Mobi Technologies 70118 Specifications

General

Brand	Mobi Technologies
Model	70118
Category	Thermometer
Language	English

Summary

Measurement Preparations

Forehead Temperature Measurement

Operating Procedure

Instructions for turning on, selecting mode, aiming, and taking forehead temperature.

Reading Indicators

Describes display symbols (Smiling/Frowning Face) and LED lights based on temperature.

Object and Liquid Temperature Measurement

Operating Procedure

Steps for taking object or liquid temperature using the thermometer.

Unit Conversion and Battery Management

Switching Between Celsius and Fahrenheit

Procedure to change temperature units (°C or °F) using Mode and Memory buttons.

Installing and Replacing Batteries

Guide on how to open the battery cover, remove old batteries, and insert new ones.

Memory Function and Device Care

Memory Recall and Deletion

How to recall up to 30 measurements and delete all stored readings.

Cleaning Instructions

Guidance on cleaning the thermometer lens and the device body.

Product Identification

Limited Product Warranty